当前位置：
科智恒衍（北京）科技有限公司 >
产品中心 >
美国岩心Temco公司产品 > ResCon HF NMR油藏条件下高频核磁共振岩心测试系统
ResCon HF NMR油藏条件下高频核磁共振岩心测试系统
| 产品型号： |
ResCon HF NMR |
| 品 牌： |
Corelab |
|
|
| 所 在 地： |
北京大兴区 |
| 更新日期： |
2024-03-13 |
ResCon HF NMR油藏条件下高频核磁共振岩心测试系统
The Reservoir Conditions High Frequency NMR system developed by Core Laboratories is designed to easily and effectively collect data for the measurement of permeability, capillary pressure and oil/water and gas/water contents of plug samples under reservoir conditions and is ideal for unconventional reservoirs. NMR data is recorded with a high level of precision using custom Core Lab software. Either 1 inch or 1.5 inch diameter samples can be used in the unique Core Lab Instruments core holder that incorporates a proprietary NMR coil.
Applications: for the measurement of permeability, capillary pressure and oil/water and gas/water contents of plug samples under reservoir conditions and is ideal for unconventional reservoirs.
Benefits:
- NMR T2 distribution provides insight into pore size distribution.
- Non-destructive, quick turnaround screening tool.
- Good correlation between NMR Total Porosity and Effective Permeability to Oil at residual water saturation.
Scope of Supply:
- 1 inch or 1.5 inch diameter Hydrostatic Core Holder
- Pressure Range: up to 10,000 psi
- Temperature Range: up to 250 degrees F
- Minimum sample length: 2 inches
- Minimum dead volume in core holder design
- Downstream effluent sampling capability
- Microliter flow rate
- Upstream/downstream pressure reading capabilities
- Data Acquisition System, Core Lab Software and Monitor
Specifications:
-23MHz Reservoir Conditions NMR
-Designed to measure water, oil, solid organic matters that contains hydrogen in samples
-NMR T2 distribution provides insight into pore size distribution
-Non-destructive, quick turnaround screening tool
-Good correlation between NMR Total Porosity and Effective Permeability to Oil at residual water saturation
-1 inch or 1.5 inch diameter Hydrostatic Core Holder, NMR coil integrated into core holder body for superior signal to noise ratio
-Pressure Range: up to 10,000 psi
-Temperature Range: up to 250 degrees F
-Minimum sample length: 2 inches
-Minimum dead volume in core holder design
-Downstream effluent sampling capability
-Microliter flow rate
-Upstream/downstream pressure reading capabilities
-Available with integrated, fully-customizable flow systems
